Product News Release 0006

New Kador Profile

We are pleased to announce the introduction of a new Aluminium Profile to compliment the current Windseal section.

The main rational is to offer an alternative fixing to the Windseal as used on the Multibay and the forthcoming side-curtain system.

Advantages of the two systems are given below:

Products

New Kador Profile

Windseal

Multibay, Side Curtain System and fabric panels.

Much quicker to install as screen made to correct height at point of manufacture.

Easy to slide into profile.

Profile will accept all fabric types.

Profile will allow fabric to pass back over fixing screws, thus hiding the profile.

No requirement for exact on-site measurements before ordering. Profile allows for adjustment in fabric width and height during installation.

Lower cost when compared to combined cost of Kador, welding and new profile.

Kador profiles with (above) and without fabric.

Kador Profile Technical		xx
Length of each Profile		= 4M
Profile width		= 44mm
Profile height		= 18mm
Minimum width of fixing face for Profile		= 22mm
Maximum centres of screws to fix Profile to building		= 500mm
Maximum length of self-drilling screw to Secure fabric in profile without contacting fixing face		= 20mm
Maximum angle of fabric pull		= 270º
Maximum distance between Profiles, based on 90mph/144kph wind-speed and solid fabric (i.e. 30M long x 6M high to be fixed top & bottom with profile, OR 6M long x 10M high to be fixed on the left and right)		= 6M
Profile diameter (same as used on Galebreaker Tubes and Windbars)		= 10mm
xx		xx
Part No	xx	xx
KP4	Kador Profile orders 4M to 95M	xx
KP96	Kador Profile orders in multiples of 96M	xx
KP1056	Kador Profile orders 1056M & over in multiples of 96M	xx

Dimensions